1-866-622-7031

Concrete Coating with Industrial Epoxy

    
Concrete coating of industrial garage floor

Our industrial epoxy withstands even high traffic garage floors.

Industrial epoxy used on flooring

Concrete coatings that work as hard as you do in your industry.

* Can be used in USDA facilities based on FSIS Directive 11,000.4 (Rev. 1), November 24, 1995.

 

McKinnon Materials has designed a line of industrial epoxies, in order to meet a range of concrete coating needs.

Our entire industrial epoxy line of products can be used for industrial seamless flooring applications and are suitable for use in manufacturing facilities, auto service garage floors, residential garage floors, commercial kitchens,restaurants, retail areas, and much more.

CLEAR INDUSTRIAL EPOXY (3 to 1)

McKinnon Materials industrial epoxy contains an additive in the Resin to make it harder, and an additive in the cure to make it chemical resistant. Our industrial epoxy can be tinted to a color of your choice for that ideal concrete coating color match. Please contact us for more information on tinting.  See Polymer Chart.  Before deciding on a color for your project, be sure to look at a manufacturer-printed color chart, as computer monitors cannot capture true colors.

  

PRIMER EPOXY (2 to 1)

An epoxy used to prepare floors before industrial epoxy application.

RAPID SET INDUSTRIAL EPOXY (3 to 1)

seamless floors fast

An epoxy designed for jobs with limited work time and may be used as a top coat as surface hardness is much greater than most epoxies. Chemical and heat resistant. Can even be used on a commercial freezer floor!

RUBBER EPOXY (7 T0 1)

An industrial epoxy coating with additional flexibility. These are mainly used in the boating industry. Click here for application instructions for Rubber Epoxy.

Paint Chips

(NOTE: McKinnon Materials, Inc. does not sell this product but can be used with our epoxy)

Paint Chips are color chips that come in a variety of colors and are sold per pound. Use these chips with our Industrial Epoxy. Contact us for more information. Color Chart.

Advantages:

  • Decorative
  • Water Base
  • Flexible
  • Unlimited Color Selection
  • Striped Colors Available
  • Various Sizes of Solid Colors
  • Color Blend Packaging Available
  • Absorb Well
  • Remain Flat
  • High Tensile Strength
  • Remain Loose in Carton
  • Fire Resistant
  • Resist Ultaviolet Degradation
  • 10 Pound Bags Available

Colors:

Standard in-stock colors are black, white, tan, brown. Solid and striped colors are available as purchases directly from manufacturer. 10# minimum order from manufacturer.

Sizes Available:

Solid colors are available in 1", 1/2", 1/4", 1/8", 1/16" and 1/32 inch. Striped colors are only available in the 1 inch size. In-stock sizes are 1 inch and 1/4 inch; other sizes made at time of order.

Packaging:

50 pound/ 5 pound minimum from manufacturer; smaller increments from McKinnon Materials, Inc.

Technical Data:

Thickness - 4 to 6 mils.

Size Distribution:

Minimum width dimension shall conform to the following distribution, as measured on a 100 gram sample, sifted with 100 shapes through U.S. Standard Sieve Series, 8" diameter, sizes 12.7 mm., 9.51 mm., No. 4 and No.10. These sieves correspond to a diagonal measure of 3/4", 1/2", 1/4" and 1/8".

Limitations:

There will be a slight variation in the Flake/Chip average size and shape due to manufacturing process. Some dust will be present within each box.

Recommended:

Manufacturer recommends chip compatibility testing in each individual resin system.

PLEASE NOTE:   Most of McKinnon Materials' products are industrial grade solutions designed to be used by professional installers or contractors.  While many DIY customers have success installing our products, we recommend hiring a professional installer, especially a McKinnon Materials' Certified Installer.