Industrial Epoxies
Concrete Coating with Industrial Epoxy
McKinnon Materials has designed a line of industrial epoxies, in order to meet a range of concrete coating needs.
Our entire industrial epoxy line of products can be used for industrial seamless flooring applications and are suitable for use in manufacturing facilities, auto service garage floors, residential garage floors, commercial kitchens,restaurants, retail areas, and much more.
Our industrial epoxy withstands even high traffic garage floors
Concrete coatings that work as hard as you do in your industry.
* Can be used in USDA facilities based on FSIS Directive 11,000.4 (Rev. 1), November 24, 1995
CLEAR INDUSTRIAL EPOXY (3 to 1)
McKinnon Materials industrial epoxy contains an additive in the Resin to make it harder, and an additive in the cure to make it chemical resistant. Our industrial epoxy can be tinted to a color of your choice for that ideal concrete coating color match. Please contact us for more information on tinting. See Polymer Chart. Before deciding on a color for your project, be sure to look at a manufacturer-printed color chart, as computer monitors cannot capture true colors.
PRIMER EPOXY (2 to 1)
An epoxy used to prepare floors before industrial epoxy application.
RAPID SET INDUSTRIAL EPOXY (3 to 1)
An epoxy designed for jobs with limited work time and may be used as a top coat as surface hardness is much greater than most epoxies. Chemical and heat resistant. Can even be used on a commercial freezer floor!
RUBBER EPOXY (7 T0 1)
An industrial epoxy coating with additional flexibility. These are mainly used in the boating industry.
Paint Chips
(NOTE: McKinnon Materials, Inc. does not sell this product but can be used with our epoxy)
Paint Chips are color chips that come in a variety of colors and are sold per pound. Use these chips with our Industrial Epoxy. Contact us for more information. Color Chart.
Advantages:
- Decorative
Water Base
Flexible
Unlimited Color Selection
Striped Colors Available
Various Sizes of Solid Colors
Color Blend Packaging Available
Absorb Well
Remain Flat
High Tensile Strength
Remain Loose in Carton
Fire Resistant
Resist Ultaviolet Degradation
10 Pound Bags Available
Colors:
Standard in-stock colors are black, white, tan, brown. Solid and striped colors are available as purchases directly from manufacturer. 10# minimum order from manufacturer.
Sizes Available:
Solid colors are available in 1″, 1/2″, 1/4″, 1/8″, 1/16″ and 1/32 inch. Striped colors are only available in the 1 inch size. In-stock sizes are 1 inch and 1/4 inch; other sizes made at time of order.
Packaging:
50 pound/ 5 pound minimum from manufacturer; smaller increments from McKinnon Materials, Inc.
Technical Data:
Thickness – 4 to 6 mils.
Size Distribution:
Minimum width dimension shall conform to the following distribution, as measured on a 100 gram sample, sifted with 100 shapes through U.S. Standard Sieve Series, 8″ diameter, sizes 12.7 mm., 9.51 mm., No. 4 and No.10. These sieves correspond to a diagonal measure of 3/4″, 1/2″, 1/4″ and 1/8″.
Limitations:
There will be a slight variation in the Flake/Chip average size and shape due to manufacturing process. Some dust will be present within each box.
Recommended:
Manufacturer recommends chip compatibility testing in each individual resin system.
PLEASE NOTE: Most of McKinnon Materials’ products are industrial grade solutions designed to be used by professional installers or contractors. While many DIY customers have success installing our products, we recommend hiring a professional installer, especially a McKinnon Materials’ Certified Installer.
Join Our Mailing List
Get our product offers and new products updates instantly.